Table of Contents
Advertisement
DI–718B and DI-718Bx Series Hardware Manual
4. Instrument Controls,
Indicators, and Connections
Instrument Front Panel
The Front panel of both DI-718B and DI-718Bx instruments provide screw terminal connection ports for analog input
signal leads. The DI-718B front panel also provides remote events and stop/start remote recording control features
via a built-in remote control jack.
DI-718B Models
The two 16-port screw terminals on the front of the instrument are used to interface analog input channels 1 through
8. Each channel has four terminals: In+, In-, Ex+, and Ex- for input signals and excitation (if required). Use the
sticker located on the top of your instrument for quick reference to terminal access port designations.
Built-In Remote Control Jack
The built-in remote control jack located on the front panel of the DI-718B accepts a standard 3.5mm stereo phone
plug (provided) and provides access to remote events and stop/start remote recording control features. Refer to the
diagram on the front panel for quick reference.
Instrument Controls, Indicators, and Connections
17
Advertisement
Table of Contents
