Table of Contents
Advertisement
DI–718B and DI-718Bx Series Hardware Manual
2.
Insert the W
Resource CD in your drive. The installation software should start automatically within 20 sec-
D
IN
AQ
onds. If it does not, start it manually by double-clicking the Setup application (setup.exe) located on the root of
the W
D
Resource CD.
IN
AQ
3.
In the "What do you want to do?" window, select "Install WinDaq Software" and click OK.
4.
In the "Installing Software" window, select the "Install Software for DI-148, DI-158, DI-710, DI-715B, and DI-
718B(x) instruments" option and click OK.
5.
In the "WinDaq Installation" dialog box, select the "Install Software" option and click OK to continue. If you
wish to view the hardware documentation you may do so now by clicking on the appropriate radio button. Docu-
mentation will be saved to your hard drive during this installation.
6.
In the "Welcome!" box, click OK to continue.
7.
Read the License Agreement. If you accept the terms, click Accept and Continue. If you choose not to accept,
click on the Do not accept and stop button to end the installation.
8.
When prompted, enter your registration information (name and company) in the appropriate text boxes and click
OK. Confirm your registration information before continuing.
9.
When prompted, specify the directory where you want to install your W
you accept the default. If you have already successfully installed a DI-148, DI-158, DI-710, DI-715B, or DI-
718B instrument be sure to install to the same folder.
10. In the "Select an Interface" box select USB and click OK.
11. DO NOT connect your USB device or cable to your PC until installation is complete. If your device is currently
connected, please disconnect it before continuing with this installation. Once your device is disconnected, click
the OK button.
12. When prompted to Select a Program Manager Group specify a destination (or group window) in the Start Menu
for W
D
software icons. It is recommended that you accept the default.
IN
AQ
13. In the "Installation Option" dialog box specify whether you want all users to have access to W
just the current User. Click Yes to allow all users to have access, click No to allow just the current user to have
access.
14. After W
D
Software installs, you will be prompted to install W
IN
AQ
CODAS Analysis software. If you wish to install either software click on Yes in the appropriate dialog box. Fol-
low the on screen prompts to complete installation.
15. Software installation is complete - you will now see a "Successful Installation" box - click OK to exit W
Installation.
You can now plug the device(s) into your PC and apply power (if required). You do not need to re-install this software
when installing more DI- 71x USB devices to your PC.
Click on the appropriate program group (specified above — default is Start > Programs > WINDAQ) and click on
"DATAQ Instruments Hardware Manager" to run W
the same program group.
IN
D
IN
AQ
D
software. All DATAQ Instruments software is located in
IN
AQ
Installation
8
D
software. It is recommended that
AQ
D
IN
AQ
/XL Trial Version and Advanced
software or
D
IN
AQ
Advertisement
Table of Contents
