Changing the Icon
You can also change the icon that
appears at the left of the file name.
Call up the ICON SELECT display by
pressing the [1 ] (ICON) button from
the character input display (page 48).
Select the desired icon by using the
[A] - [J] buttons, or by using the
[3
] - [5
] buttons, then enter
the selected icon by pressing the [8 ]
(OK) button.
Using the [DATA ENTRY] Dial
This convenient control lets you easily select items in the display or quickly change parameter values. The actual
function of the [DATA ENTRY] dial differs depending on the selected display.
Adjusting values
You can change parameter values by
rotating the [DATA ENTRY] dial. In the
example [BALANCE] display, turning
the dial adjusts the volume of the part
in reverse display (highlight). To adjust
the volume of another part, first select
the part by pressing the [
corresponding to the part, then rotate
the [DATA ENTRY] dial.
Selecting items
You can select the desired item or
function in the display by rotating the
[DATA ENTRY] dial. The selected item
can then be called up or executed by
using the [ENTER] button.
In the example VOICE display, you
can select the desired voice file with
the [DATA ENTRY] dial, and call up
the selected item by pressing the
[ENTER] button on the panel.
A
B
C
D
E
1
] button
Basic Operations — Organizing Your Data
2
3
4
5
6
7
Cancels the icon selection operation.
BACK
NEXT
Turns pages
for icon
F
selection.
G
H
I
J
Enters the
selected icon.
8
DATA ENTRY
ENTER
DATA ENTRY
PSR-2100/1100
49