Setting Auto Accompaniment-Related Parameters - Style Setting, Split Point, And Chord Fingering; Setting Auto Accompaniment-Related Parameters - Style Setting And Split Point - Yamaha Portatone PSR-1100 Owner's Manual

Setting Auto Accompaniment-related Parameters —
Style Setting, Split Point, and Chord Fingering
The explanations here apply to step #3 of the procedure on page 136.
Setting Auto Accompaniment-related Parameters — Style Setting
and Split Point
1 2 3 4 5
This applies to the OTS Link function, in which One Touch Settings are automatically called up
with changes in the section. This determines the timing in which the One Touch Settings change
with the section. (The [OTS LINK] button must be on.)
Real Time
One Touch Setting is immediately called up when you press a section button.
Next Bar
One Touch Setting is called up at the next measure, after you press a section button.
You can determine whether the chord played in the chord section will sound or not in the Stop
Accompaniment condition.
When this is set to "OFF," you can use the Chord Match function (page 122) with the Multi Pads or the
Harmony effect (page 61) without having to playback a style.
About Split Point
Split point is the position on keyboard that separates the Auto
Accompaniment section (ACMP) and left-hand section (LEFT) from the
right-hand section (MAIN). The LEFT split point cannot be set lower than
the ACMP split point, and the ACMP split point cannot be set higher than
the LEFT split point.
Making Global and Other Important Settings — Function
These select the part to which the split point
setting is applied: accompaniment, left-hand
range, or both. Press the desired key for the split
F
point while holding down one of these buttons.
The pressed key is included in the range for the
G
Auto Accompaniment section of the keyboard
H
(ACMP) or the left-hand range (LEFT).
I
J
6 7 8
Determines the split points for the auto accompaniment (ACMP) and the left-
hand range (LEFT). The same value can be set for both or for each
independently, using buttons [F], [G], and [H] (see above). You can use these
buttons by themselves to set the split point value.
Determines the default section that is automatically called up when selecting
different accompaniment styles (when accompaniment is stopped).
Turns touch response for the accompaniment on/off. When this is set to "ON,"
the accompaniment volume changes in response to your playing strength (in
the Auto Accompaniment section of the keyboard).
The PSR-2100/1100 lets you automatically enable Sync Stop (page 68) simply
by quickly pressing/releasing keys in the Auto Accompaniment section of the
keyboard. This parameter lets you set the length of the key-hold time.
A+L (ACMP + LEFT)
Allows you to simultaneously set the split
point for both the left-hand range and the
Auto Accompaniment section of the
keyboard.
L (LEFT)
Allows you to set the split point for the left-hand range of the keyboard.
A (ACMP)
Allows you to set the split point for the Auto Accompaniment section of the
keyboard.
Accompaniment
Auto Accompaniment section
About Section Set
When any of the Main A-D
sections is not included in
the accompaniment style
data, the nearest section is
automatically selected. For
example, when Main D is not
contained in the selected
accompaniment style, Main
C will be called up.
Stop Accompaniment
When auto accompaniment
is turned on and Synchro
Start is off, you can play
chords in the left-hand
(accompaniment) section of
the keyboard with the style
stopped, and still hear the
accompaniment chords.
Split point (A) Split point (L)
Right-hand
Left-hand
Auto
section
section
Split point (A) + (L)
section
Right-hand
section
+ Left-hand section
PSR-2100/1100
141