Displaying Music Notation - Score - Yamaha Portatone PSR-1100 Owner's Manual

Displaying Music Notation — Score
With this feature, you can have the notation automatically shown on the display as the song plays. This can be used
with your own recordings as well as the internal Demo songs.
1
Select the
desired song
(page 79, 81).
3
Enables/disables display of the left-hand key range.
Depending on other settings, this parameter may
be unavailable and may appear grayed out. If this is
the case, go to the detailed setting display (shown
below; use the [8 ] buttons) and set the LEFT
CH. parameter to any channel except "AUTO." Or,
go to the SONG SETTING display in the Function
menu (page 136) and set the TRACK 2 parameter
to any channel except "OFF."
Enables/disables display of the right-hand key range.
Channel 1 is automatically selected when [TRACK1]
is set to [OFF] from the SONG SETTING display
(page 140).
Enables/disables display of the lyrics.
If the selected song does not contain lyric data, lyrics are
not displayed.
Enables/disables display of the chords.
If the selected song does not contain chord data, chords
are not displayed.
Enables/disables display of the note name (pitch).
Determines the display resolution (or zoom level) of the notation.
SMALL...... Notation is shown in small size.
LARGE ..... Notation is shown in large size.
2
A
B
C
D
E
1 2
This calls up the detailed setting display for notation.
For details, see the next page.
3 4 5 6 7 8
Song Playback
If the MAIN screen (at left)
is not displayed, press the
[DIRECT ACCESS] button
followed by the [EXIT] but-
ton.
The displayed notation is
generated by the PSR-
2100/1100 based on the
song data. As a result, it
may not be exactly the
same as commercially
available sheet music of the
same song — especially
when displaying notation of
complicated passages or
many short notes.
n
Some song data for the
PSR-2100/1100 has been
recorded with special "free
tempo" settings. For such
song data, the tempo, beat,
measure and music
notation will not displayed
correctly.
n
[RIGHT] and [LEFT] cannot
be turned off at the same
time.
n
The note name is indicated
at the left of the note. When
the space between the
notes is too small, the indi-
cation may be moved to the
top left of the note.
n
You can increase the num-
ber of measures that will be
displayed by decreasing the
other items to be displayed
(parts, lyrics, chords, etc.).
n
When accidentals (sharp
and flats) and notes cannot
be displayed on one line,
they are displayed in the
next line from the middle of
the measure.
n
The notation functions can-
not be used to create song
data by inputting notes. For
information on creating
song data, see page 99.
PSR-2100/1100
83