Style File Format; Operation - Yamaha Portatone PSR-1100 Owner's Manual

Creating Accompaniment Styles — Style Creator

Style File Format

The Style File Format (SFF) combines all of
Yamaha's auto accompaniment know-how into
a single unified format. By using the edit
functions, you can take full advantage of the
SFF format and freely create your own styles.
The chart at right indicates the process by
which the accompaniment is played back.
(This does not apply to the rhythm channels.)
The basic or "source" pattern in the chart is the
original style data. This source pattern is
recorded using accompaniment style
recording (see below).
As shown in the chart at right, the actual
output of the accompaniment is determined by
various parameter settings and chord changes
(played in Auto Accompaniment section of the
keyboard) entered to this source pattern.

Operation

1
Select the desired accompaniment style
for editing. To record a new
accompaniment style from scratch, call
up the BASIC page in the Style Creator
display and select "New Style" by
pressing the [C] button.
4
Record and edit the accompaniment style. For details on the
operations for each display, refer to the explanations starting
on the next page.
112
PSR-2100/1100
Source Pattern
Pitch Conversion
Other Settings
2
DIGITAL
STUDIO
SOUND CREATOR
DIGITAL RECORDING
MIXING CONSOLE
PART
F
G
H
I
J
1 Source Root (root note of basic chord)
2 Source Chord (type of basic chord)
Chord changes (in Auto Accompa-
niment section of the keyboard)
3 NTR (Note Transposition Rule)
4 NTT (Note Transposition Table)
5 High Key (threshold of the pitch
conversion)
6 Note Limit (soundable range)
7 RTR (Retrigger Rule; how the pitches of
the chord change)
Output
3
A
B
C
D
E
BACK NEXT
Use the [BACK]/
[NEXT] buttons to
select the various
pages.
These are the patterns
recorded to the
accompaniment styles
(page 119).
This data is created by
chords played in the
Auto Accompaniment
section of the
keyboard (page 65).
These settings are
edited from the
PARAMETER display.
These parameters
determine how the
pitch of the source
pattern is converted
when you play chords
in the Auto
Accompaniment
section of the
keyboard.
5
Call up the Style display
by pressing the [I]
(SAVE) button (in
Assembly page: [J]
button), then save the
recorded / edited data
to the USER or FLOPPY
DISK page.
Press the [EXIT]
button to close
E
ND
the STYLE
CREATOR
display.