Advertisement
PSR-E433/PSR-I455
DATA BACKUP (PSR-E433, PSR-I455)
To backup user data to external devices, use the "Musicsoft Downloader (bundled software)".
You can use the Musicsoft Downloader to transfer "Backup Files" including the ten User Songs stored on the instrument, to a computer.
List of data that can be backed up
• User Song data
• Style data transferred from a computer and loaded to Style numbers 187–191 (PSR-E433), 207–211 (PSR-I455)
• Registration Memory data
• Function Settings: Tuning, Split Point, Touch Sensitivity, Style Volume, Song Volume, Pattern Volume, Metronome Volume, Grade,
Demo Group, Demo Play, Demo Cancel, Master EQ type, Your Tempo on/off, Auto Power Off setting, Battery
Select, Language, Tabla/Tanpura Volume (PSR-I455), Freeze Mode (PSR-I455)
PREPARATION
PC (Personal Computer)
AB type USB cable of less than about 3 meters
MIDI-USB Driver *
1
Musicsoft Downloader (MSD) *
*1: Obtain these programs from Yamaha offi cial website.
(URL>> http://www.yamahapkclub.com)
Install these software in PC beforehand.
BACKUP PROCEDURE
1. Turn off the power of the instrument.
2. End all the application software.
3. Exit from any power-saving mode of the computer (such as suspended, sleep, standby).
4. Connect the instrument to the PC with a USB cable.
5. Turn on the power of the instrument.
6. Click the Control Panel on PC.
7. Click "USB-MIDI Driver" on the Control Panel to open the dialog box.
8. Remove the check from the check box next the word "Thru ON/OFF" in the dialog box.
9. Start up the Musicsoft Downloader.
10. If you click "Electronic Musical Instruments" in the Musicsoft Downloader display, and then "System Drive", a fi le named
"PSR-E433.BUP" (PSR-E433) "PSR-I455.BUP" (PSR-I455) will appear in the lower right corner of the Musicsoft Downloader
display.
This is the backup fi le. For details about how to transmit backup fi le using the Musicsoft Downloader application, refer to the
Online help in the application.
NOTE: Preset Song data cannot be transmitted from the instrument.
While the computer is connected to the instrument, you should wait for six seconds or more between these operations: (1) when
turning the power of the instrument off then on again, or (2) when alternately connecting/disconnecting the USB cable.
• The backup data, including the ten User Songs is transmitted/received as a single fi le. As a result, all backup data
will be overwritten every time you transmit or receive. Keep this in mind when transferring data.
• We recommend that you use a power adaptor rather than batteries when transferring data. The data can be
corrupted if the batteries fail during the transfer.
• Do not rename the backup fi le on the computer. If you do so, it will not be recognized when transferred to the
instrument.
38
1
USB cable
PSR-E433
Advertisement
Chapters
