Yamaha Portatone PSR-1100 Owner's Manual page 132

Using a Microphone — MIC. (PSR-2100 only)
3
Select a Vocal Harmony type.
Select a Vocal Harmony parameter.
Press the [EXIT] button to return to the previous
E
display.
ND
Vocal Harmony Parameter List
Chordal Type/Vocoder Type
Harmony Gender Type
Lead Gender Type
Lead Gender Depth
Lead Pitch Correction
Auto Upper Gender Threshold
Auto Lower Gender Threshold
Upper Gender Depth
Lower Gender Depth
Vibrato Depth
Vibrato Rate
Vibrato Delay
Harmony1 Volume
Harmony2 Volume
Harmony1 Pan
Harmony2 Pan
Harmony1 Detune
Harmony2 Detune
Pitch to Note
Pitch to Note Part
132
PSR-2100
A
B
C
D
E
1 2 3 4
Determines how the harmony notes are applied.
Can be set to "Off" or "Auto". When "Auto", the gender of the harmony sound is changed automatically.
Determines whether and how the gender of the lead vocal sound (i.e., the direct microphone sound) will be
changed. When "Off" no gender change occurs. When "Unison", "Male" or "Female" is selected the
corresponding gender change is applied to the lead vocal. (In this case the number of harmony notes which
can be produced in addition to the lead vocal is reduced to one.)
Adjusts the degree of lead vocal gender change produced when one of the Lead Gender Types (above) is
selected.
When "Correct" is selected the pitch of the lead vocal is shifted in precise semitone steps. This parameter is
only effective when one of the Lead Gender Types is selected.
Gender change will occur when the harmony pitch reaches or exceeds the specified number of semitones
above the lead vocal pitch.
Gender change will occur when the harmony pitch reaches or exceeds the specified number of semitones
below the lead vocal pitch.
Adjusts the degree of gender change applied to harmony notes higher than the Auto Upper Gender
Threshold.
Adjusts the degree of gender change applied to harmony notes lower than the Auto Lower Gender
Threshold.
Sets the depth of vibrato applied to the harmony sound. Also affects the lead vocal sound if a Lead Gender
Type is selected.
Sets the speed of the vibrato effect.
Specifies the length of the delay before the vibrato effect begins when a note is produced.
Sets the volume of the first harmony note.
Sets the volume of the second harmony note.
Specifies the stereo (pan) position of the first harmony note. When "Random" is selected the stereo position
of the sound will change randomly whenever the keyboard is played.
Specifies the stereo (pan) position of the second harmony note. When "Random" is selected the stereo
position of the sound will change randomly whenever the keyboard is played.
Detunes the first harmony note by the specified number of cents.
Detunes the second harmony note by the specified number of cents.
When "ON" the lead vocal sound "plays" the PSR-2100 tone generator system. (However, dynamic changes
in the vocal sound do not affect the volume of the tone generator.)
Determines which of the PSR-2100 parts will be controlled by the lead vocal when the Pitch to Note
parameter is "ON".
F
G
H
I
J
Return to the VOCAL HARMONY
TYPE display.
5 6 7 8
Adjust the parameter value.
Save the changed
data (page 38, 47).
The saved settings can be
named (page 44) or deleted
(page 46) in the USER page.