Selecting Files And Folders - Yamaha Portatone PSR-1100 Owner's Manual

Selecting Files and Folders

Select a file shown in the display. In this example, we'll select a voice file.
First, press the VOICE [PIANO & HARPSI.] button to call up the display containing the files.
This display ("Open/Save" display) is typical of those used to call up and store files (voice files).
The PSR-2100/1100 already contains a variety of voices in the PRESET section. You can store your own original voices
created with the Sound Creator function to the USER or FLOPPY DISK section.
1
Select "PRESET," "USER," or "FLOPPY
DISK" by using the [BACK][NEXT]
button.
A
B
C
D
E
1 2 3
2
Use the [1 ] - [7 ] buttons to
turn the pages.
When the amount of pages exceeds
seven, the bottom of the display changes
as shown below.
Press Next Press Prev.(previous)
E
ND
Press the [EXIT] button
to go back to the MAIN
display.
You can go back to the
previous display by
pressing the [EXIT]
button.
F
G
H
I
J
4 5 6 7 8
3
Select the file/folder.
There are two ways to select the file/folder:
• Press the [A] - [J] button.
Press the letter button corresponding to the
file/folder you wish to call up. (In the example
display shown above, the voice files are
shown.)
• Use the [DATA ENTRY] dial and the
[ENTER] button.
When you turn the [DATA ENTRY] dial, the
highlight moves among the available files/
folders. Highlight the desired file or folder
(voice files are shown in the example above)
and press the [ENTER] button to call up the
selected item.
Exiting from small pop-up
windows
You can also exit from small
pop-up windows (such as in the
illustration below) by pressing
the [EXIT] button.
Basic Operations — Organizing Your Data
Selecting a different language in the "LAN-
GUAGE" display (page 52, 154) may cause
the following problems.
BACK NEXT
• Some characters of the file names you
entered may be garbled.
• Files may not be accessible.
Restoring the original language solves
the above problems.
Reading the files on the computer with a
different language system may cause
similar problems to those above.
ENTER
DATA ENTRY
Double-clicking the
appropriate [A] -[J] button
calls up the corresponding
file and returns to the MAIN
display.
Highlighting the desired file
and double-clicking the
[ENTER] button calls up the
corresponding file and
returns to the MAIN display.
PSR-2100/1100
43