Fingering Of Auto Accompaniment; Orchestrations An - Yamaha PortaSound PSS-590 Owner's Manual

Do
|
| itis possible for the function to provide chord work as you play the keys designated for Auto Accompaniment: C1 thru F#2.
|
|
[ « Auto Accompaniment Keys »
< mode
FINGERING
o 3X
SINGLE _FIN-
FINGER GERED
SINGLE FINGER mode
FINGERING
A o
SINGLE FIN-
FINGER GERED
Auto "ue Section
(C1 thru F#2)
hear that Voice sounded on keys C1 thru F#2.
i When a FINGERING Mode is OFF, (Normal keyboard )
FINGERING
SINGLE FIN:
FINGER GERED
b. 3 Orchestrations
Another important function to consider when you're using
Auto Accompaniment is Orchestration. There are 3 buttons
which are: INTRO, LARGE, and BRIDGE located in the
Orchestration select. Depending on how you assign these
Orchestrations in combining one another, you can produce
many styles of arrangements.
INTRO button:
en you press the INTRO. button, the LED will light up,
and you are set-up for Intro. (Same as in Rhythm Style
Section). Now, after selecting either SINGLE FINGER or
FINGERED mode, when you start the Auto
Accompaniment, it will play an Intro. controlled by the
chords you play with your left hand, and in the Style which
is currently selected.
»» LARGE button:
This button controls whether the Auto Acommpaniment will
_ be played with a SMALL ensemble or a LARGE ensemble
(of Instrumentation). When you press the LARGE button
and the LED lights up, you will have the LARGE ensemble
Effect, and when the LED is not lit up, you have the SMALL
ensemble Effect.
»» BRIDGE button:
When you press the BRIDGE button, the LED will light up
and you will be in the BRIDGE pattern set-up (same as in
the Rhythm Style Section) when the LED is not lit up it will
be in NORMAL pattern set-up. The Auto Accompaniment
will play in either case assigned, the arranging which fits to
each Pattern. Also, depending on the status of the LARGE/
SMALL ensemble selected using the LARGE button, the
arranging will vary accordingly.
You can play with various patterns combinig these 3
Orchestrations' activation and inactivation.
* INTRO inactivation simply means Starting the Rhythm without Intro..
This has no concern with LARGE active or inactive.
* You can assign the Orchestration buttons at any time, regardless of the
START/STOP status. The initial pre-set settings are: INTRO./Off,
LARGE/On, BRIDGE/Off (NORMAL).