Omron R88D-1SN ECT Series Startup Manual page 8

Manual name
NJ/NX-series Motion
Control Instructions
Reference Manual
NJ/NX-series
Troubleshooting Manual
1S-series AC
Servomotors/Servo Drives
with Built-in EtherCAT
Communications User's
Manual
8
Cat. No. Model
W508 NJ501-□□□□
NJ301-□□□□
W503 NJ501-□□□□
NJ301-□□□□
I586
R88D-1S□-ECT
R88M-1□
Application
Learning about the
specifications of the motion
control instructions that are
provided by OMRON.
Learning about the errors
that may be detected in an
NJ/NX-series Controller.
Learning detailed
specifications of a
1S-series Servo Drive.
Description
Describes the motion control instructions.
When programming, use this manual
together with the NJ-series CPU Unit
Hardware User's Manual (Cat. No.
W500), NJ/NX-series CPU Unit Software
User's Manual (Cat. No. W501), and
NJ/NX-series CPU Unit Motion Control
User's Manual (Cat. No. W507).
Describes concepts on managing errors
that may be detected in an NJ/NX-series
Controller and information on individual
errors.
Use this manual together with the
NJ-series CPU Unit Hardware User's
Manual (Cat. No. W500) and
NJ/NX-series CPU Unit Software User's
Manual (Cat. No. W501).
Describes how to install and wire the
Servo Drive, set parameters needed to
operate the Servo Drive, and remedies to
be taken and inspection methods to be
used in case that problems occur.