The Message Is Displayed On The Computer Screen During Setup - Canon MAXIFY iB4060 Online Manual

The Message Is Displayed on the Computer Screen During Setup

The Enter Password Screen Is Displayed During Setup
The Screen for Setting the Encryption Is Displayed After Selecting the Access Point in the Access Points
Screen
"You are connecting the printer to the non encrypted wireless network" Is Displayed
The Enter Password Screen Is Displayed During Setup
The following screen is displayed if an administrator password is set to the printer which has already been
set up to use via a network.
Enter the administrator password you have set.
Note
• An administrator password is already specified for the printer at the time of purchase.
For details:
About the Administrator Password
For improving security, it is recommended to change the administrator password.
Changing the Settings in the Admin Password Sheet
The Screen for Setting the Encryption Is Displayed After Selecting the
Access Point in the Access Points Screen
This screen is displayed automatically if the selected access point is encrypted. In this case, configure the
details to use the same encryption settings set to the access point.
For information on the encryption settings, see Changing the Settings in the Wireless LAN
361
Sheet.