The Message Is Displayed On The Computer Screen During Setup - Canon iP110B Online Manual

The Message Is Displayed on the Computer Screen During Setup

The Enter Password Screen Is Displayed During Setup
The Screen for Setting the Encryption Is Displayed After Selecting the Access Point in the Access Points
Screen
"You are connecting the machine to the non encrypted wireless network" Is Displayed
The Enter Password Screen Is Displayed During Setup
The following screen is displayed if an administrator password is set to the printer which has already been
set up to use via a network.
Enter the administrator password you have set.
Note
• An administrator password is already specified for the printer at the time of purchase.
For details:
About the Administrator Password
For improving security, it is recommended to change the administrator password.
Changing the Settings in the Admin Password Sheet
The Screen for Setting the Encryption Is Displayed After Selecting the
Access Point in the Access Points Screen
This screen is displayed automatically if the selected access point is encrypted. In this case, configure the
details to use the same encryption settings set to the access point.
For information on the encryption settings, see
"You are connecting the machine to the non encrypted wireless network" Is
Displayed
Security is not configured on the access point. The printer can still be used, so continue the setup
procedure to complete it.
Important
• If you connect to a network that is not protected with security measures, there is a risk of disclosing
data such as your personal information to a third party.
Changing the Settings in the Wireless LAN
322
Sheet.