Printing Out Network Setting Information - Canon MAXIFY iB4060 Online Manual

Printing Out Network Setting Information

You can print out the current network settings of the printer.
Important
• This print out contains valuable information about your computer. Handle it with care.
1. Make sure that the printer is turned on.
2. Load a sheet of A4 or Letter-sized plain paper.
3. Press the Setup button.
The Setup menu screen is displayed.
4. Use the button to select Device settings, then press the OK button.
5. Use the button to select LAN settings, then press the OK button.
6. Use the button to select Print LAN details, then press the OK button.
The printer starts printing the network setting information.
The following information on the printer's network setting is printed out.
Item
Wireless LAN
Connection
MAC Address
SSID
Password
Communication Mode
Channel *1
Encryption
WEP Key Length
Authentication
Signal Strength
TCP/IP Version
IPv4 IP Address
Explanations of the item
Wireless LAN
Connection status
MAC Address
SSID
Password
Communication Mode
Channel
Method of the Encryption
WEP Key Length
Method of the Authentication
Signal Strength
TCP/IP Version
Selected IP Address (IPv4)
216
Setting
Enable/Disable
Active/Inactive
XX:XX:XX:XX:XX:XX
SSID of the wireless LAN/SSID of the access
point mode
Password of the access point mode (8 to 10
alphanumeric characters)
Infrastructure/Access Point Mode
XX (1 to 13)
none/WEP/TKIP/AES
Inactive/128/64
none/auto/open/shared/WPA-PSK/WPA2-PSK
0 to 100 [%]
IPv4 & IPv6/IPv4
XXX.XXX.XXX.XXX