Digital Output - Yamaha DVD-S1200 Owner's Manual

Changing settings

Digital output

Change these settings when you have connected equipment
through this unit's DIGITAL AUDIO OUT terminals (OPTICAL or
COAXIAL).
Refer also to Common procedures (➡ page 28) and the Audio sec-
tion in Summary of settings (➡ page 29).
PCM Down Conversion
Select how to output the high-quality audio signals (sampling fre-
quencies of 96 kHz and 88.2 kHz) on discs that do not have copy-
r i
protection. Choose the settings to suit the equipment you have con-
nected.
Equipment
Setting (Able to handle
88.2 kHz or more)
No 1 Yes
Yes No
1 The equipment cannot output signals of 88.2 kHz or more if the
setting is "No" and the equipment is unable to handle these sig-
nals.
Note
Signals are down-sampled to either 48 kHz or 44.1 kHz despite the
above settings if they have a sampling frequency of 176.4 kHz or
more or are copyright protected.
Dolby Digital
Bitstream (Factory preset):
When you have connected a unit with a built-in Dolby Digital decod-
er.
PCM:
When you have connected a unit that doesn't have a built-in Dolby
Digital decoder.
DTS Digital Surround
PCM (Factory preset):
When you have connected a unit that doesn't have a built-in DTS
decoder.
Bitstream:
When you have connected a unit with a built-in DTS decoder.
These changes to digital audio output must be made, other-
wise bitstream signals the decoder cannot handle will be out-
put. If these signals are output, "noise" will be output which
can cause harm to your ears and speakers.
g h
Audio output
Output as is
Down-sampled to
48 kHz or 44.1 kHz
t
33