Advertisement
2.0 Safety Information (cont.)
WARNINGS:
Do not operate in an explosive atmosphere
Do not remove covers or panels
To avoid personal injury, do not remove covers and panels. Do not operate the equipment without the covers and panels fitted. There are no internal
adjustments required during commissioning of the equipment.
Grounding the Equipment
The unit is supplied by 24V DC and therefore does not require an earth grounding cable to avoid electric shock. However it is recommended that the unit is
properly grounded to a known good earth via the bolt at the rear of the SI3500 to meet the full specification and EMC requirements.
2.0 Safety Information (cont.)
3
502783 issue 5
Advertisement
