Advertisement
6.0 Operating Screen (cont.)
6.9 Operator Screen
Auto Range ON/OFF see 6.7 Display Menu
6.0 Operating Screen (cont.)
Press Zero to select ABS (Absolute) or TARE (Offset)
Press
to apply Preset (see 6.7) or ABS (Absolute)
33
Selected Measurement Menu see 6.3
Track PEAK+,PEAK-,DIFF Selected at Measurement menu see
6.3 or PEAK/TRACK membrane on keypad
TRACK Measures actual distance/angle within the set limits
displaying green. Turning red when
outside the set limits. Returning to green
when back inside the limits.
PEAK+ Measures within the set limits displaying green
turning red when outside the set limits.
Pressing ENTER resets
PEAK- Measures within the set limits displaying green
turning red when outside the set limits.
Pressing ENTER resets
DIFF measures Peak+, Peak-, measures within the set limits
displaying green turning red when outside of limits out
If manual set, Peak +/- Press enter to reset.
If Auto set, Peak + reset to probe actual position
Below Peak Trigger Time/Peak Trigger Level
If Auto set. Peak - reset to probe actual position
Above Peak Trigger Time/Peak Trigger Level
If Auto set, Diff - Diff zeroed every time period
Selected by Limit Menu
Press MENU see 6.1 Set Up Menu
502783 issue 5
Advertisement
