Advertisement
6.0 Operating Screen (cont.)
6.1 MENUS and SETUPS
Scroll up or down using the
Probes 6.2
Selects the type of probes to be
used with this instrument, the
parameters, channels and Identifica-
tion associated with each probe.
Limits 6.4
Sets up the Upper and Lower
measurement limits
Serial Port 6.6
Sets up the parameters for the Se-
rial RS232 Port.
Utilities 6.8
Restore Factory Default Settings
Exit Menu 6.9
Shows Operator Screen
6.0 Operating Screen (cont.)
keys to the required sub menu PRESS (ENTER)
14
Measurement 6.3
Selects Measurement type. A,B,(A+B) etc.
Measurement Mode (Track, Peak+, Peak-, Diff)
Reset Mode (Manual/Auto)
Trigger Time (0000 ms)
Peak Trigger Level (+/-000.00000xx)
Units (mm,inch for distance)(rad,deg for angle)
Unipolar/Bipolar (Auto Mode, Unipolar, Bipolar)
Distance 'n' (0001.0000) for angle
Input/Output 6.5
Logic I/O + Analogue outputs
Print options
Display 6.7
Set Language, Contrast,
Bar Offset, Bar
(+/-000.00000)
AutoRange (on/off)
Places After Decimal
point (0 to 6)
Shows current
Firmware version
502783 issue 5
Advertisement
