Certificate - Tenda D302 User Manual

Associated WAN Interface: Specify the WAN iterface of the tunnel.
Associated LAN Interface: Specify the LAN iterface of the tunnel.
Manual: If you select Manual, configure the following settings also:
IPv4 Mask Length: Specify the IPv4 Mask Length.
-
6rd Prefix with Prefix Length: Specify the 6rd Prefix with Prefix Length.
-
Border Relay IPv4 Address: Specify the Border Relay IPv4 Address.
-
Automatic: If Automatic is selected, no configurations are required.
Apply/Save: Click to apply and save your settings.
IPv4inIPv6
Click IPv4inIPv6 and Add to enter the following screen:
Tunnel Name: Specify the name of the tunnel.
Mechanism: Currently, only 6rd configuration is supported.
Associated WAN Interface: Specify the WAN iterface of the tunnel.
Associated LAN Interface: Specify the LAN iterface of the tunnel.
Manual: If you select Manual, enter the AFTR information also:
Automatic: If Automatic is selected, no configurations are required.
Apply/Save: Click to apply and save your settings.

4.1.14 Certificate

This section explains the following information:
• Local Certificates
• Trusted CA (Certificate Authority) Certificates
Local Certificates
Here you can Add, View or Remove certificates. Local certificates are used by peers to verify your identity. Maximum 4
- 78 -
Wireless Modem Router User Guide