Tenda D302 User Manual page 47

Select IPoE.
1.
Edit the Enter Service Description. This field is optional. We recommend that you keep the default.
2.
Select a network protocol: IPv4, IPv6 or IPv4 & IPv6 (dual stack).
3.
Click Next.
4.
_________________________________________________________________________________________________
Note:
If you select IPv6 or IPv4 & IPv6 (dual stack), skip to IPv6.
_________________________________________________________________________________________________
Obtain an IP address automatically: This allows the router to automatically acquire IP information from your ISP
or your existing networking equipment.
- 47 -
Wireless Modem Router User Guide