Table of Contents
Advertisement
It remains steadily on when browsing
answered incoming calls in the call log.
It indicates an outgoing call in the
redial list.
It flashes when there is a new missed
call or when browsing the unread
missed calls in call log.
It remains steadily on when browsing
the read missed calls in call log.
It flashes when receiving incoming call.
It remains steadily on when you are
in a call.
The speaker is on.
The ringer is off.
The alarm is activated.
Answering machine: it flashes when
there is a new message or when the
memory is full. It is displayed when
the telephone answering machine is
turned on.
It flashes when there is a new voice
message.
It remains steadily on when the voice
messages are already viewed in the
call log.
The icon is not shown when there is
no voice message.
It is displayed when you scroll up /
/
down a list or increase / decrease the
volume.
There are more digits on the right.
Press REDIAL/C
ECO+
The ECO+ mode is activated.
Check the signal strength
The number of bars indicates
the connection status between
the handset and base station. The
more bars are shown, the better
the connection is.
10
EN
to read.
•
Make sure the handset is connected to the
base station before you make or receive
calls and carry out the phone functions
and features.
•
If you hear warning tones when you are
on the phone, the handset is almost out
of battery or the handset is out of range.
Charge the battery or move the handset
nearer to the base station.
Note
•
When ECO+ is on, the signal strength is not displayed.
Switch the handset on or off
Press and hold
to switch the handset on or
off.
Advertisement
Table of Contents
