Check The Signal Strength; Switch The Handset On Or Off - Philips D275 User Manual

Icon Descriptions
When the handset is off the
base station or charger, the bars
indicate the battery level (from
full to low).
When the handset is on the
base station or charger, the bars
keep scrolling until charging is
complete.
The empty battery icon flashes
and you hear an alert tone.
The battery is low and needs
recharging.
It displays the connection status
between the handset and base
station.
The more bars are shown, the
better the signal strength is.
It remains steadily on when line
is in use.
It flashes when receiving incom-
ing call.
Answering machine (D275 only):
It displays when the telephone
answering machine is turned on.
It flashes when there is a new
TAM message.
It remains steadily on when
there are unread voice messages
from network.
The icon is not shown when
there is no voice message.
* This is network dependent.
Press
within 2 or up to 4 handsets.
Press to go back to the previous
menu or cancel the current
operation.
The speaker is on.
The alarm is on.
The keypad is locked.
The call blocker is on.
The ringer is off.
EN 12
for an intercom call
It remains steadily on when
there are unread incoming calls
in the incoming call log
Press to clear a character or digit.
Press to stop the alarm.
Press to mute or unmute during
a call.

Check the signal strength

The number of bars indicates the
connection status between the
handset and base station. The
more bars are shown, the better
the connection is.
• Make sure the handset is connected to the
base station before you make or receive
calls and carry out the phone functions and
features.
• If you hear warning tones when you are
on the phone, the handset is almost out
of battery or the handset is out of range.
Charge the battery or move the handset
nearer to the base station.

Switch the handset on or off

Press and hold
or off.
to switch the handset on