Table of Contents
Advertisement
2
Press and hold
10 seconds.
3
Enter the system PIN. Press REDIAL/C
to make corrections. Then press MENU/
OK to confirm the PIN.
» Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN is incorrect or no base is found within a
certain period, a notification message will be displayed
on your handset.
•
If registration fails, unplug the power adapter from the
base station and plug it back. Wait for 15 seconds, and
then repeat the registration procedure.
•
The preset PIN is 0000. No change can be made on it.
Unregister the handsets
1
Press MENU/OK.
2
Select [Services] > [Unregister], then
press MENU/OK to confirm.
3
Enter the system PIN. (The preset PIN is
0000). Press REDIAL/C
number.
4
Select the handset number to be
unregistered.
5
Press MENU/OK to confirm.
» The handset is unregistered.
Tip
•
The handset name is displayed beside the handset
number in standby mode.
Restore default settings
You can reset your phone settings to the
original factory settings.
on the base station for
to remove the
1
Press MENU/OK.
2
Select [Services] > [Reset], then press
MENU/OK to confirm.
» A confirmation request is displayed on
the handset.
3
Press MENU/OK to confirm.
» All settings (except the phonebook
and direct access keys information) are
reset.
EN
31
Advertisement
Table of Contents
