No display
•
Make sure the batteries are charged.
•
Make sure there is power and the phone is
connected.
Bad audio (crackles, echo, etc.)
•
The handset is nearly out of range. Move it
closer to the base station.
•
The phone receives interference from the
nearby electrical appliances. Move the base
station away from them.
•
The phone is at a location with thick walls.
Move the base away from them.
•
The phone receives interference from the
DSL (digital subscriber line) connection.
Install a DSL filter to prevent the noise.
Contact your service provider for the DSL
filter.
The handset does not ring.
•
Make sure the handset ringtone is turned
on.
•
Make sure the handset is registered to the
base station.
The caller ID does not display.
•
The service is not activated. Check with
your service provider.
•
The caller's information is withheld or
unavailable.
Note
•
If the above solutions do not help, disconnect the
power supply from both the handset and base station.
Try again after 1 minute.
EN
36