Check The Signal Strength - Philips Mira M565 Extended User Documentation

Design cordless phone, design cordless phone with answering machine
Hide thumbs Also See for Mira M565:
Table of Contents

Advertisement

Icon
Descriptions
When the handset is off the
base station/charger, the
bars indicate the battery level
(from full to low).
When the handset is on the
base station/charger, the bars
keep scrolling until charging is
complete.
The empty battery icon
flashes and you hear an alert
tone.
The battery is low and needs
recharging.
It displays the connection
status between the handset
and base station. The more
bars are shown, the better the
signal strength is.
It remains steadily on when
browsing answered incoming
calls in the call log.
It indicates an outgoing call in
the redial list.
It flashes when there is a new
missed call or when browsing
the unread missed calls in call
log.
It remains steadily on when
browsing the read missed
calls in call log.
It flashes when receiving
incoming call.
It remains steadily on when
you are in a call.
The speaker is on.
The ringer is off.
Answering machine (M565
only): it flashes when
there is a new message or
when the memory is full. It
displays when the telephone
answering machine is turned
on.
EN
10
It flashes when there is a new
voice message.
It remains steadily on when
the voice messages are
already viewed in the call log.
The icon is not shown when
there is no voice message.
It is displayed when you scroll
/
up / down a list or increase /
decrease the volume.
There are more digits on the
right. Press REDIAL/C to read.
ECO+
The ECO+ mode is activated.

Check the signal strength

The number of bars
indicates the connection
status between the handset
and base station. The more
bars are shown, the better
the connection is.
Make sure the handset is connected
to the base station before you make
or receive calls and carry out the
phone functions and features.
If you hear warning tones when you
are on the phone, the handset is
almost out of battery or the handset
is out of range. Charge the battery
or move the handset nearer to the
base station.
Note
When ECO+ is on, the signal strength is not
displayed (see 'ECO+ mode' on page 23).

Advertisement

Table of Contents
loading

Table of Contents