Table of Contents
Advertisement
4.3 Installation and Removing the Belt Clip
- To attach belt clip to radio, align belt clip rails with the grooves in radio and slide the belt clip
onto the mounting rails until it latches into place.
- To remove belt clip from radio, push up on tab of belt clip with flat bladed screw driver and at
the same time, slide the belt clip towards the top of Radio figure4-3).
4.4 Accessory connector
Accessory connector is used to connect external speaker MIC, and headset, etc.
Please close the cover when nothing is connected.
Figure 4-2) Installation and Removing the Battery
Figure 4-3) Installation and Removing the Belt Clip
8
Advertisement
Table of Contents
