Related Manuals for YEONHWA M TECH XP-100D
Summary of Contents for YEONHWA M TECH XP-100D
- Page 1 User Manual VHF Transceiver XP-100D UHF Transceiver XP-400D YeonHwa M Tech Co.,Ltd Version #1 (2016-12-15) 36 Jeonpa-Ro, 44Beon-Gil, Manan-Gu, Anyang-City, Gyeongg-Do, Korea Tel: 82-31-444-7270...
- Page 2 1. XP-100D/400D Series Main Features The XP-100D/400D Digital Radio was developed by YeonHwa M Tech Co.,Ltd to be user-friendly and compact design, to have various features and to use at the construction / industrial / commercial / public areas for the safety & convenience of users.
-
Page 3: Specification
2. Specification 2.1 XP-100D General Frequency Range XP-100D :136 ~ 174 MHz XP-400D : 400~470 MHz Frequency Stability ±1.5ppm (-30 to +60 ) Programmable Channels 16 Zones / 32 Channels Channel Spacing 12.5KHz Digital Vocoder AMBE++ Dimensions 103mm(H) x 52mm(W) x 32mm(D) -
Page 4: Checking Items In The Package
1 slot charger Antenna Belt clip Hand strap(option) User manual Figure 3-1) XP-100D/400D series main items XB-2600 : 2,600mAH Li-ion battery pack XC-100D : Single Slot Charger XC-200D : Dual Slot Charger 423D-WS : 400~450MHz SMA Whip antenna 460D-WS : 440~470MHz SMA Whip antenna... - Page 5 3.1 Appearance of XP-100D/400D Series Radio Figure 3-1) Appearance of XP-100D/400D Series Radio...
-
Page 6: Basic Operation
Figure 3-2) LCD Indication of XP-100D/400D Series Radio 4. Basic operation Please fully read the instruction manual before use. This manual provides important information related to radio operation. 4.1 Installation and Removing the Antenna To install the antenna, insert the antenna into antenna connector and screw the antenna clockwise. - Page 7 4.2 Installation and Removing the Battery 4.2.1 Installation of the battery To install battery, slide up the battery towards the top of the radio until battery latch is locked. 4.2.2 Removing the Battery - Slide the battery latch located on the bottom of radio to the open position as shown in Figure 4-2.
-
Page 8: Accessory Connector
Accessory connector is used to connect external speaker MIC, and headset, etc. Please close the cover when it is used. Figure 4-4) Accessory connector 5. Radio operation The definition of the various buttons of the XP-100D/400D series is the same as Figure 5-1). Figure 5-1) XP-100D/400D Series button definition... - Page 9 When you press the NENU / ENTER button, currently programmed menu is displayed and you can select a desired menu using by VOLUME + / LEFT button or VOLUME- / RIGHT button. Figure 5-2) XP-100D Series Menu Figure 5-3) XP-100D Series Menu Tree...
- Page 10 5.5 CH/Menu UP/Down Button "CH / MENU UP" and "CH / MENU Down" are to change channels and in the menu entry mode, it is select the UP / Down of the Menu. 5.6 EAR/MIC Jack Accessory connector is used to connect external speaker Mic, and headset, etc. Please close the cover when nothing is connected.
-
Page 11: Charging The Battery
6. Charging the Battery 6.1 Safety Notes 1) The radio of XP-100D/400D series receives power from high-performance Li-ion battery (XL- 260). XL-260 Battery is safe of high performance and highly reliable, and could be charged very fast. The charging of the enclosed Radio on t cause damage on the battery and also, will cause a trouble on the Radio. - Page 12 6.4 Charger (XC-100/XC-200) The XC-100/XC-200 charger is designed to charge only the Li-ion battery enclosed in this Radio. Adaptor input voltage: AC85~250V XC-100/200 Specification Description XC-100 XC-200 Input voltage DC+12V DC+12V Slot Battery XB-2400 XB-2400 Quick charging time In 5 hours and half In 5 hours and half Operation temperature -20 ~+40...
-
Page 13: Menu Description
7. Using the XP-100D/400D Series 7.1 Menu description Press the Menu/OK button on the front to enter the menu mode. In the menu mode, there are eight of the main menus, and set and used according to the application and the environment, it can be more convenient to use. -
Page 14: Call Recording
Inbox It is possible to store up to 10 incoming messages. When you choose contents stored in the list, you can see the received messages. When the received message is more than 10, the earliest incoming message is cleared first and it is registered. - Page 15 7.1.5 Scan When turning ON the scan operation, to start the scan in the order of the channel that has been set in the scan list. If there is a channel used during the scan, you will receive the contents stops at that channel.
- Page 16 BCL: If the current channel is busy, the transmission prohibition BCLO: The ability to send regardless of the user of the current channel Button Lock With the exception of the minimum of buttons necessary for the user to prevent unwanted terminal operation, it is the ability to limit the operation.
- Page 17 8. Precautions Matters affecting the performance of the equipment. e strong electronic wave to be emitted from the Radio can have an effect on the performance of the Radio and can cause the Radio to have a defect. speaker microphone and earphone, etc.) from the other makers, which can cause to make a defect on battery and a malfunction or a defect on the Radio.
-
Page 18: Safety Notes
In case of the area that medical equipments are being used, please use the Radio after discussion with the equipment maker or the related doctor. electric/electronic devices are being used, because the strong electronic wave from the Radio can have an effect on the equipments. 10. -
Page 19: Warranty Card
2. Warranty is one year from the day the factory. ng conditions, during the warranty period may be repaired by YeonHwa M Tech Co.,Ltd or our authorized service organization free of charge. 3. For the following cases, some service fees will be charged. - Page 20 Output: DC12V,1A...