Basic Operation - YEONHWA M TECH XP-400D User Manual

Uhf transceiver
Hide thumbs Also See for XP-400D:
Table of Contents

Advertisement

4. Basic operation

Please fully read the instruction manual before use.
This manual provides important information related to radio operation.
4.1 Installation and Removing the Antenna
To install the antenna, insert the antenna into antenna connector and screw the antenna clockwise.
To remove the antenna, screw the antenna counter clockwise.
the antenna with a strong power from the Radio can make a damage on the antenna
connector, which may cause the Radio to have a critical problem.
4.2 Installation and Removing the Battery
4.2.1 Installation of the battery
To install battery, slide up the battery towards the top of the radio until battery latch is
locked.
4.2.2 Removing the Battery
- Slide the battery latch located on the bottom of radio to the open position as shown in
Figure 4-2.
-
The battery is removed by pressing it against and sliding it towards the bottom of the radio
Installation and Removing the Antenna
Figure 4-1)
When installation of the antenna, giving a strong pressure to the Radio or pulling
7

Advertisement

Table of Contents
loading

Table of Contents