Table of Contents
Advertisement
XC-100/200 Specification
Description
Input voltage
Slot
Battery
Quick charging time
Operation temperature
Dimension
Charging current
7. Using the XP-400D Series
7.1 Menu description
Press the Menu/OK button on the front to enter the menu mode.
of the main menus, and set and used according to the application and the environment, it can be
more convenient to use.
☞
Note) If the menu is not operated for at least 25 seconds after launch, the menu mode is
automatically end and it is switch to receive mode.
7.1.1 Contact List
Set a contact list (set to CPS program) and will be pressing the PTT button to call. If you want to
call with another registered contact, after you select a contact from the contact list and press the
PTT button, it will be the call.
the CPS(Customer Programing Software) program.
When you enter in the contact menu, the individual, group and All Call contact list is displayed.
XC-100
DC+12V
1
XB-2400
In 5 hours and half
-20℃~+40℃
70(W)x58(D)x36(H)m/m
870mA(Rapid charging)
Figure 7-1) XP-400D Menu
The list of contacts in the menus can be registered / deleted using
13
XC-200
DC+12V
2
XB-2400
In 5 hours and half
-20℃~+40℃
70(W)x104(D)x36(H)m/m
870mA(Rapid charging)
In the menu mode, there are eight
Advertisement
Table of Contents
