Related Manuals for YEONHWA M TECH TPD-8424
Summary of Contents for YEONHWA M TECH TPD-8424
- Page 1 User Manual UHF Transceiver TPD-8424 Version #1 (2015-02-27) Yeonhwa M Tech Co., Ltd. 36 Jeonpa-Ro, 44Beon-Gil, Manan-Gu, Anyang-City, Gyeongg-Do, Korea Tel: 82-31-444-7270...
- Page 2 1. TPD-8424 Series Main Features The TPD-8424 Digital Radio was developed by Yeonhwa M Tech Co., Ltd. to be user-friendly and compact design, to have various features and to use at the construction / industrial / commercial / public areas for the safety & convenience of users.
-
Page 3: Specification
2. Specification 2.1 TPD-8424 General Frequency Range A : 410 ~ 450 MHz, B : 440~470MHz Frequency Stability ±1ppm (-30 to +60℃) Programmable Channels 16 Zones / 32 Channels Channel Spacing 12.5KHz Digital Vocoder AMBE++ Dimensions 99mm(H) x 51mm(W) x 21mm(D) -
Page 4: Checking Items In The Package
1 slot charger Antenna Belt clip Hand strap(option) User manual Figure 3-1) TPD-8424 series main items TPD-8424BK : Block Case TPD-8424BE : Blue Case TPD-8424OR : Orange Case TAD-800L : Single Slot Desktop Charger TAD-800USB : USB Charging Cord Only... - Page 5 3.1 Appearance of TPD-8424 Series Radio Figure 3-2) Appearance of TPD-8424 Series Radio...
-
Page 6: Basic Button Operations
Series Radio Figure 3-3) LCD Indication of TPD-8424 4.1 Basic Button Operations Button Operation Description Press and hold the power button for 2 seconds, the device power is turned Power ON/OFF ON. When you press the power button for 2 seconds during use, the power is OFF. -
Page 7: Basic Operation
4. Basic operation Please fully read the instruction manual before use. This manual provides important information related to radio operation. 4.1 Antenna installation and removal To install the antenna, insert the antenna into antenna connector and screw the antenna clockwise. To remove the antenna, screw the antenna counter clockwise. -
Page 8: Belt Clip Installation And Removal
Figure 4-2) Battery installation and removal Figure 4-3) Rear cover mounting 4.3 Belt clip installation and removal Put the belt clip to belt clip's hole of the radio and tighten the screws as shown in figure 4-4. Conversely loosen the screws, the belt clip is separated with radio. Figure 4-4) Belt clip installation and removal... - Page 9 4.4 External accessory connection Align the body with accessory hole and push and tighten the screws as shown figure 4-5. To remove the accessory, loosen the screw and pull out. Figure 4-5) External accessory connection 4.5 Charging USB Open the USB cover and connect the micro USB charging adaptor. And the LED will turn on the red color.
-
Page 10: Radio Operation
5. Radio operation The definition of the various buttons of the TPD-8424 series is the same as Figure 5-1). Figure 5-1) TPD-8424 Series button definition 5.1 Power ON/OFF Button When the power ON / OFF button pressed for more than 3 seconds, start-up sound occurs with company logo and the radio turns ON. -
Page 11: Volume Button
Figure 5-2) TPD-8424 Series Menu Figure 5-3) TPD-8424 Series Menu Tree 5.5 Volume Button The size of volume is a total 16 steps. Push button of “ Volume – ", the sound getting smaller. And push button of “ Volume + “, the sound getting bigger. - Page 12 5.8 P1, P2, P3 Programmable Button If you push the P button for more than 2 seconds, the P button has two functions of Short Key and Long Key. The Short Key is set by PC program and Long Key is defined in the body. If the key input is not 10 seconds, it will be automatically set Key Lock.
-
Page 13: Charging The Battery
6. Charging the Battery 6.1 Safety Notes 1) The radio of TPD-8424 series receives power from high-performance Li-ion battery (TAD-8200). TAD-8200 Battery is safe of high performance and highly reliable, and could be charged very fast. The charging of the enclosed Radio on the other maker’s charger will cause damage on the battery and also, will cause a trouble on the Radio. -
Page 14: How To Charge
Red LED is flicker Complete charging Green LED lights Keep charging Green LED lights 7. Using the TPD-8424 Series 7.1 Menu description Press the button on the front to enter the menu mode. In the menu mode, there are eight of the main menus, and set and used according to the application and the environment, it can be more convenient to use. - Page 15 7.1.2 Message When a new message arrives, the contents will be display on LCD in receive mode. And if you are in other mode, it will be seen in the ICON form when a new message arrives. Message menu has a simple message, inbox, outbox, three kinds of menu. Simple Message Using the CPS program can create a total of 10 messages and One message can be edit up to 40 characters.
- Page 16 not required, it can be completely deleted. Calls list can store up to 63 and one call list will be limited to 2 minutes and 30 seconds. If you want to use the call recording function, you can select in the settings. .
-
Page 17: Button Lock
4. Lone walker It is function to inform others about your safety within the time set in the menu. Setting time supports up to 1-100 minutes.. 5. BCL/BCLO If the another user on the currently used channel, it is the ability to limit the transmission so as not to interfere.. - Page 18 8. Precautions Matters affecting the performance of the equipment. Don’t remove the antenna from the Radio or don’t transform the antenna or don’t make any change on the antenna. The strong electronic wave to be emitted from the Radio can have an effect on the performance of the Radio and can cause the Radio to have a defect.
-
Page 19: Safety Notes
In case of the area that medical equipments are being used, please use the Radio after discussion with the equipment maker or the related doctor. Please don’t use the Radio at the place where computer or the other electric/electronic devices are being used, because the strong electronic wave from the Radio can have an effect on the equipments. -
Page 20: Inportant Safety Information
Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations. For a list of YEONHWA M TECH-approved antennas, batteries, visit the following website: http://www.xradio.co.kr/ Any modification to this device, not expressly authorized by YEONHWA M TECH, may void the user’s authority... -
Page 21: Warranty Card
2. Warranty is one year from the day the factory. • Failure of the product under normal operating conditions, during the warranty period may be repaired by Yeonhwa M Tech Co., Ltd. or our authorized service organization free of charge.