Maintenance Instructions; If You Need Assistance - Maytag MDE20PR Installation Instructions Manual

Clean lint screen before and after each cycle.
■
Removing accumulated lint:
■
From inside the dryer cabinet:
Lint should be removed every 2 years or more often, depending
on dryer usage. Cleaning should be done by a qualified person.
From the exhaust vent:
Lint should be removed every 2 years, or more often, depending
on dryer usage.
Keep area around dryer clear and free from combustible
■
materials, gasoline, and other flammable vapors and liquids.
Keep dryer area clear and free from items that would obstruct
■
the flow of combustion and ventilation air.
Contact your authorized Commercial Laundry distributor. To locate your authorized Commercial Laundry distributor, or for web inquiries,
visit www.MaytagCommercialLaundry.com.
If you cannot locate your distributor, the Commercial Laundry Support Center will answer any questions about operating or maintaining
your dryer not covered in the Installation Instructions.
Just dial 1-800 NO BELTS (1-800-662-3587) — the call is toll free.
When you call, you will need the dryer model number and serial number. Both numbers can be found on the serial-rating plate located
in the dryer door opening.

MAINTENANCE INSTRUCTIONS

If dryer does not operate, check the following:
Electrical supply is connected.
■
Circuit breaker is not tripped or house fuse is not blown.
■
Door is closed.
■
Controls are set in a running or "on" position.
■
START button has been pushed firmly.
■
For gas dryers, check that gas supply shut-off valves are set
■
in open position.

IF YOU NEED ASSISTANCE

27