Easy Record - Technics SX-KN2400 Operating Instructions Manual

Part IV

Easy Record

Suppose you are playing the Keyboard and you wish to record and play back your performance to hear
how it sounds. You can bypass the set-up procedures of the full-scale sequencer and begin recording
quickly and easily.
• Note that by executing EASY REC, the original data in the selected song number is erased.
Recording procedure
1.
Press the EASY REC button to turn it on.
SEQUENCER
PLAY
• The display changes to the following.
∧
2.
Use the SONG and
song number in which to record (1 to 10).
• If you press the NAMING button, you can
assign a name to your song. (Refer to page
85.)
3.
Set the desired sounds, effects, rhythms, etc.
Playback
1.
Press the SEQUENCER RESET (FILL IN 1)
button.
FILL IN
1
SEQUENCER
RESET
2.
Press the START/STOP button.
• Your recorded performance is played back
automatically.
• When you are finished playing back your per-
formance, press the SEQUENCER PLAY but-
ton to turn it off.
EASY REC
∨
buttons to select the
4.
Press the OK button.
• The display changes to the REALTIME
RECORD display.
5.
Play the keyboard.
• Recording begins as soon as you start the
rhythm or play the keyboard.
6.
When you have finished recording, press the
EASY REC button to turn it off.
• The PLAY button turns on.
Sequencer
77
QQTG0692