Table of Contents
Advertisement
No.
AUTO PUNCH recording has been
unsuccessful because SEQUENCER
56
operation was interrupted before the
PUNCH OUT measure was reached.
The song that you have tried to load
exceeds this instrument's available
58
memory and cannot be loaded. The
selected song memory has been
cleared.
The computer connection is not active
because the computer port switch is
62
set to MIDI. Please turn the power off,
set the switch to the desired setting
and turn the power back on.
This Bitmap is in the wrong format for
63
the KN and cannot be loaded. See the
Owners Manual for more details.
Please select the Panel Memory that
64
you want to name.
It is not possible to use the CHORD
FINDER in this mode. Please select
65
CHORD FINDER from HOME page or
CHORD STEP RECORD page.
SOLO pads are special pads which
include Chord information. Pleases
66
use SOLO pads when the rhythm and
accompaniment is playing.
There are no APC or CHORD tracks.
67
Select and APC track or CHORD
track, and try again.
It is not possible to record directly into
the SOLO pads. Record on the
68
SEQUENCER and Copy the melody
and chord information into a SOLO
pad.
It is not possible to delete all mea-
69
sures.
It is not possible to insert over 16 mea-
70
sures in a PATTERN.
It is not possible to set the start mea-
71
sure to the measures you set to copy.
192
QQTG0692
Contents
Hide quick links:
Advertisement
Table of Contents
