Technics SX-KN2400 Operating Instructions Manual page 126

Part VI
TECHNICS FORMAT
1.
Use the buttons below the display to specify
the file number you wish to save to.
• The types of data that can be saved are
shown in a frame on the right side of the
display. If you press the SAVE button, all the
indicated data is saved. Ordinarily PERFOR-
MANCE data is selected, but you can use the
SAVE OPTION to select specific data to save.
2.
If you wish to assign a name to the file, press
the NAME button.
• The display looks similar to the following.
<SAVE OPTION>
Specify the kind of data you wish to save to the
disk. To maximize effective use of disk memory
or to minimize the save time, select only the type
of data you wish to save.
1.
Use the PAGE buttons to access the 2/3
SAVE OPTION display.
• The display looks similar to the following.
126
QQTG0692
3.
Use the buttons below the display to assign a
name.
• Set the character input position with the POSI-
TION buttons, select the characters with the
alphanumeric buttons
assignment.
• Press the INS button to enter a space at the
cursor position.
• Press the DEL button to erase the character at
the cursor position.
• Press the CLR button to erase the entire
name.
• Press the →← button to center the name.
4.
Press the OK button.
• The display returns to the SAVE display.
5.
Press the SAVE button.
• The SAVE operation begins.
• If you attempt to save data to a file number in
which data is currently saved, the display
changes to the confirmation display. Press the
YES button to continue the SAVE procedure,
or press the NO button if you wish to cancel it.
2.
Use the buttons below the display to specify
the types of data you wish to save (YES/NO).
• For PANEL MEMORY, select from NO/1
BANK/ALL.
Selecting 1 BANK will save only bank A.
• Press the PERFORM button to select all the
performance data, or press the BACKUP but-
ton to select all the back up data at once.
• If the ALL OFF button is pressed, all the set-
tings change to NO.
3.
Press the SAVE button.
• The SAVE operation begins.
Disk Drive (KN2400)
and repeat name