Auto Play Chord - Technics SX-KN2400 Operating Instructions Manual

Part II
ENDING
Finish the rhythm performance with an ending
pattern.
1.
Select a rhythm and press the START/STOP
button.
2.
Press the INTRO & ENDING 1 or INTRO &
ENDING 2 button to turn it on.
INTRO & ENDING
1
• An ending pattern is produced, and then the
rhythm performance stops.
• If you accidentally press the INTRO & END-
ING button in the middle of the tune, you can
press the FILL IN 1 or FILL IN 2 button. The
ending pattern stops, and a fill-in pattern is
produced, after which the normal rhythm per-
formance continues.

Auto Play Chord

Simply by playing a chord on the keyboard, the AUTO PLAY CHORD function automatically plays an
accompaniment pattern which matches perfectly the selected rhythm. With a real accompaniment as a
background, you can concentrate on playing the melody.
How the AUTO PLAY CHORD works
Chord
52
QQTG0692
2
Melody
When an AUTO PLAY CHORD mode is
selected, an automatic accompaniment which
matches the rhythm you have chosen is played
in the chord which you specify with your left
hand. The melody is played with your right hand.
• The accompaniment pattern of the AUTO
PLAY CHORD is composed of 8 parts:
DRUMS 1, 2, BASS, ACCOMP 1–5.
• The volume of each part can be adjusted with
the buttons below the display. (Refer to page
30.)
Playing the rhythm