Technics SX-KN2400 Operating Instructions Manual page 141

Part VII
<SAVE OPTION>
Specify the kind of data you wish to save to the
SD card. To maximize effective use of SD card
memory or to minimize the save time, select only
the type of data you wish to save.
1.
Use the PAGE buttons to access the 2/3 dis-
play.
• The display looks similar to the following.
2.
Use the buttons below the display to specify
the types of data you wish to save (YES/NO).
• For PANEL MEMORY, select from NO/1
BANK/ALL.
Selecting 1 BANK will save only bank A.
• Press the PERFORM button to select all the
performance data, or press the BACKUP but-
ton to select all the back up data at once.
• If the ALL OFF button is pressed, all the set-
tings change to NO.
3.
Press the SAVE button.
• The SAVE operation begins.
SD-SOUND (SMF) FORMAT
This instrument's SEQUENCER data can be
saved in the SD-SOUND format. SD-SOUND
data can be converted to the "Standard MIDI
File" (SMF Fromat 0) format for use on other
instruments.
• What you can save in the SMF format (FOR-
MAT 0) is ordinary performance data, such as
note data. Data such as chord and rhythm
data, COMPOSER data, etc. is not saved. If
you wish to also save this special Technics
data, save the data in the Technics File for-
mat.
• If you use the APC TO SMF CONVERT func-
tion of the SEQUENCER, you can convert the
patterns of the automatic accompaniment, etc.
to SMF data. (Refer to page 100.)
<SEQUENCER SONG SAVE>
You can specify a single song in the SEQUEN-
CER to save to the SD card.
1.
Use the PAGE buttons to access the 3/3 dis-
play.
• The display looks similar to the following.
2.
Use the buttons below the display to select the
song number you wish to save.
3.
Press the SAVE button.
• The SAVE operation begins.
MEMO
You can save data on an SD card within the
limits as follows.
• Maximum number of folders: 99
• Maximum number of songs in a folder: 20
Maximum number of letters for the song or
folder name: 16
1.
To overwrite a song number that already has
data, use the buttons below the display to
select the song number you wish to save to.
2.
If you wish to assign a name to the file, press
the NAME button.
3.
Use the buttons below the display to assign a
name.
4.
Press the OK button.
• The display returns to the SAVE display.
(Continued on the next page)
SD Card (KN2600)
141
QQTG0692