Technics SX-KN2400 Operating Instructions Manual page 32

Setting display
When you select an item from the menu display,
the setting display for the item is shown.
The buttons to the right, left and/or directly below
the display are used to select and adjust the set-
tings.
Example of setting display: MASTER
TUNING
Press the button corresponding to the
ton on the display to change the value.
• In this manual, this procedure is written as fol-
∧
lows: "Use the and
pitch."
TEMPO/PROGRAM
If the TEMPO/PROGRAM indicator is lit while
you are using the display to adjust the setting, it
indicates that these buttons can be used to
quickly change the displayed value or setting.
TEMPO/
• The setting which can be adjusted is high-
lighted on the display.
32
QQTG0692
∧ ∨
or but-
∨
buttons to adjust the
PROGRAM
EXIT
While the setting display is shown, press this but-
ton to go back to the previous display.
DISPLAY
HOLD EXIT
DISPLAY HOLD
Press this button to turn it on when you wish to
maintain the current display. You can keep a dis-
play which is normally automatically canceled,
for example, or even during a performance, you
can monitor information which is not shown on
the normal display.
DISPLAY
HOLD EXIT
• The indicator for this button may flash if the
current display is one which is normally auto-
matically canceled.
• If the PROGRAM MENUS button, for exam-
ple, is pressed, the DISPLAY HOLD mode is
canceled.
CONTRAST
Press the CONTRAST button and adjust the dis-
play's viewability using the
the screen.
CONTRAST
• When adjusting the CONTRAST, the set value
is shown shortly on the display.
HELP
HELP
∧ ∨
and buttons on