Table of Contents
Advertisement
Part V
SEQ TO COMPOSER COPY
Data from the SEQUENCER can be copied to a
COMPOSER memory. For example, you can
use a rhythm pattern on a song disk as the auto-
matic accompaniment for your own performance.
1.
Play back the song you wish to copy from
SEQUENCER to confirm the tracks, the mea-
sures and the time signature you wish to copy.
2.
Follow the procedure in "Prepare to record" to
prepare the COMPOSER memory you will be
copying to. (Refer to page 106.)
• Be sure that time signature setting in the
SEQUENCER data you are copying from and
the time signature in the COMPOSER mem-
ory you are copying to are the same, or the
data will not be copied successfully.
3.
On the COMPOSER MENU display, select
SEQ TO COMPOSER COPY.
• The display looks similar to the following.
4.
Use the FIRST MEAS
specify the number of the first measure to
copy.
∧
5.
Use the LAST MEAS
ify the number of the last measure to copy.
6.
Use the TRANSPOSE
change the key of the copied measures (−24
to +24).
• Units are in semitones.
∧
7.
Use the MEMORY
the COMPOSER memory to copy to.
∧
8.
Use the PATTERN
the pattern to copy to.
116
QQTG0692
∧
∨
and
buttons to
∨
and
buttons to spec-
∧
∨
and
buttons to
∨
and
buttons to specify
∨
and
buttons to specify
9.
For each COMPOSER part, specify the
SEQUENCER track from which to copy data.
• Use the PART L and M buttons to specify
the part name, and the TRACK
tons to specify the track number.
• Parts which are set to OFF are blank.
10.
Press the OK button.
• "COMPLETED!" is shown on the display.
• If you wish to use the COMPOSER function
to edit the copied data, press the EDIT but-
ton, and follow the procedure to record a pat-
tern.
• In the case of INTRO or ENDING, if a mea-
sure contains a Maj or Min command, it is
reproduced in the other pattern as well.
Composer
∧
∨
and
but-
Hide quick links:
Advertisement
Table of Contents
