Table of Contents
Advertisement
No
Function Keys
Standby Key
1
Camera Select Keys
2
Number Keypad
3
Standby Key
The standby button turns ON/OFF the camera.
To reboot the camera, press the standby button
for 3 seconds. After device initialization is
complete, the camera head will automatically
return to HOME position.
Camera Select Keys
To select a camera in a multi-camera environment
using camera select keys (CAM1 – CAM4), you
should first assign an ID number to the camera
intended for operation using F1 – F4 keys then
press CAMERA SELECT (CAM 1~ CAM4) keys to
navigate between the four cameras.
Note: See F1 – F4 keys for ID number assignment
instructions.
Number Keypad
Set, recall and clear presets using the number
keypad.
Set Preset
Please press the SET PRESET at first, and then
please press any of the number keys from 0 to 9
to save the PTZ settings. You will be allowed to
save up to up to 10 presets using the remote
control.
Call Preset
Press any of the number keys from 0 to 9 to recall
the preset settings.
Note: Make sure the preset that you want to
recall contains PTZ settings before pressing the
number key.
Clear Preset
First press the CLEAR/PRESET key then the
number key (0 – 9) to empty the preset.
21
Descriptions
Advertisement
Table of Contents
