Adjusting The Print Image Density; Before Making A Master; After Making A Master - Ricoh LDD745 Operating Instructions Manual

Adjusting the Print Image Density

You can adjust the print image densi-
ty to suit your needs. There are two
ways to do this:

❖ Before Making a Master

Adjust the image density using the
{Image Density} key.

❖ After Making a Master

Adjust the image density using the
{Speed} key.
Before Making a Master
A
Use the {Image Density} key before
pressing the {Master Making} key.
Note
❒ In addition to Normal, Darker
and Lighter modes, you can also
select Tint mode to make half-
tone prints. When the Lighter
mode indicator is blinking, Tint
mode is selected.
After Making a Master
A
Press the {Speed} key to decrease
the printing speed. Press it again
to bring the printing speed back
to Fast.
Note
❒ The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.
BQA033S
Adjusting the Print Image Density
1
BQA034S
21