Operating Instructions - Univex MG89 Operator's Manual

OPERATING INSTRUCTIONS

Choose a location for the MG8912 that is convenient for the operator, allowing free access to the
power switch and sufficient clearance for safety and care of operation.
Slice the meat into strips which will easily fit into the throat of the grinder.
Place a suitable container at the discharge of the grinder.
Place the meat in the feed pan and start the grinder.
Hand feed the meat into the grinder. DO NOT place fingers inside the throat of the grinder, use the
stomper to push the meat into the worm. Do not use the stomper to force feed the meat into the
grinder at an increased rate. Best results are obtained when the meat is fed only as fast as the grinder
processes it.
Switch the power "OFF" when processing is interrupted.
When the processing has been completed, switch the power "OFF" and disconnect the power supply
cord.
Dismount the grinder from the drive unit and disassemble, wash and dry the components of the
grinder.
Store the components in a refrigerator for added sanitation.
Page 7