Page 2
TO INSURE BOTH SAFE AND TROUBLE-FREE PERFORMANCE, WE STRESS THAT ALL PERSONNEL THAT WILL BE INVOLVED WITH YOUR NEW UNIVEX MEAT GRINDER MUST READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE ATTEMPTING TO OPERATE THIS UNIT. ------------------------- WE APPRECIATE YOUR COOPERATION AND YOUR BUSINESS.
3/16 grinding plate, a meat stomper, and a stainless steel feed pan. The MG0012 meat & food grinder has safety and ease of operation built into it. The readily removable feed pan provides ease of processing and cleaning.
WIPE DOWN THE EXTERIOR OF THE DRIVE UNIT ONLY, NEVER HOSE DOWN OR IMMERSE THE DRIVE UNIT IN WATER. DO NOT ATTEMPT TO SERVICE THE DRIVE ASSEMBLY. PLEASE CONTACT UNIVEX CORPORATION FOR THE NUMBER OF THE NEAREST AUTHORIZED SERVICE AGENT IN YOUR AREA FOR ADJUSTMENTS OR REPAIR.
INSTALLATION • This is a table-top unit. • Insure that the grinder is located on a flat, level and stable surface. There should be sufficient clearance around the grinder for safety and ease of operation. Sufficient space must be provided for the feed pan and the collection container.
CLEANING INSTRUCTIONS 1. Turn the grinder off and disconnect the power supply cord. 2. Disassemble the grinder in the reverse order of the assembly instructions: Remove the storage container and feed pan. Remove the ring, plate and knife. WARNING: The knife is very sharp and can cut fingers. Slide the worm assembly from the grinder housing.
8:00 am and 5:00 pm local time, Monday through Friday. Univex will not cover overtime charges of any kind. Please call the Univex Warranty Service Department at 800-258-6358 to report warranty claims before arranging repair or attempting to return the unit to Univex Corporation.