Configuring Quota Mode - HIKVISION DS-7104HQHI-K1 User Manual
Ds-7100hqhi-k1 series;
ds-7200hqhi-k1 series;
ds-7200hqhi-k2 series;
ds-7200hqhi-k/p series;
ds-7200huhi-k1 series;
ds-7200huhi-k2 series;
ds-7200huhi-k/p series;
ds-7300hqhi-k4 series
Hide thumbs
Also See for DS-7104HQHI-K1:
- Quick start manual (17 pages) ,
- User manual (220 pages) ,
- User manual (184 pages)
Table of Contents
Advertisement
At least 2 hard disks must be added on your DVR when you want to set a HDD to Redundancy, and
there is one HDD with R/W property.
13.4 Configuring Quota Mode
Purpose
Each camera can be configured with allocated quota for the storage of recorded files.
Steps
Step 1 Go to Menu > HDD > Advanced > Storage Mode.
Step 2 Set the Mode to Quota, as shown below.
The DVR must be rebooted to enable the changes to take effect.
Step 3 Select a camera for which you want to configure quota.
Step 4 Enter the storage capacity in the text field of Max. Record Capacity (GB).
Step 5 You can copy the quota settings of the current camera to other cameras if required. Click
the Copy button to enter the Copy Camera interface, as shown below.
Digital Video Recorder User Manual
Figure 13-16 Storage Mode Settings Interface
186
- Quick Links:
- Front Panel
Hide quick links:
Advertisement
Table of Contents
