Table of Contents
Advertisement
Embroidering Preparation
e
While pressing in the lever on embroidery foot "Q"
with your finger, fit the embroidery foot bar over the
needle clamp screw.
1 Embroidery foot bar
2 Needle clamp screw
3 Presser bar
f
Secure embroidery foot "Q" with the presser foot
holder screw, making sure that embroidery foot "Q" is
vertical.
a
1 Mounting notch
2 Presser foot holder screw
g
Hold the embroidery foot in place with your right
hand, and then use the included screwdriver to
securely tighten the presser foot holder screw.
CAUTION
• Use the included screwdriver to firmly tighten
the screw of the embroidery foot. If the screw
is loose, the needle may strike the presser foot
and possibly cause injury.
h
Press
to unlock all keys and buttons.
58
a
b
c
b
Attaching the Embroidery Unit
CAUTION
• Before attaching the embroidery unit, be sure
to turn off the machine. Otherwise, injuries
may occur if one of the operation buttons is
accidentally pressed and the machine starts
embroidering.
• Do not move the machine with the embroidery
unit in place. The embroidery unit may be
dropped and cause injury.
• Keep your hands and other objects away from
the embroidery carriage and frame when they
are moving. Otherwise injury may result.
a
Turn off the machine.
b
Pull the flat bed attachment off to the left.
c
Insert the embroidery unit connector into the
connection port, and then lightly push in the
embroidery unit until it snaps into place.
c
b
Note
• Make sure that there is no gap between the embroidery
unit and the machine, otherwise the embroidery pattern
may not be embroidered correctly. Be sure to fully insert
the connector into the connection port.
• Do not push on the carriage when attaching the
embroidery unit to the machine, otherwise damage to
the embroidery unit may result.
• Do not touch the connector in the embroidery unit
connector slot. The connector could be damaged, and it
may cause malfunctions.
• Do not lift up on the embroidery carriage, and do not
forcefully move it. It may cause malfunctions.
1 Connection port
2 Embroidery unit
connector
3 Carriage
a
Advertisement
Table of Contents
