Belkin F5D8232-4 User Manual page 89

Manually Configuring Network Settings
4.
Select the "TCP/IP" tab
see "Manually" or "Using DHCP" . If you do not, check the
(5)
PPPoE tab
selected . If it is, you will need to configure your N1 Vision for a
PPPoE connection type using your user name and password .
5.
If "Manually" is selected, your N1 Vision will need to be set up
for a static IP connection type . Write the address information
in the table below . You will need to enter this information into
the N1 Vision .
6.
If not already selected, select "Using DHCP" next to "Configure"
(4)
, then click "Apply Now" .
Your network settings are now configured for use with the
N1 Vision.
(3)
. Next to "Configure"
to make sure that "Connect using PPPoE" is NOT
(4)
85
, you should
1
2
3
4
5
6
7
8
9
10