Belkin F5D8232-4 User Manual page 27

Connecting and Configuring your N1 Vision
Push Button Security – Select this
option if you would like to set up your
computers or devices using the Wi-Fi
Protected Setup
TM
Using WPS is not a requirement to
connect to the N1 Vision .
To make a WPS connection, select
the "New Connection" option . To do
so, you must have WPS enabled on
the computer or device connecting to
the N1 Vision . You will need to push
the WPS button in your computer or
device within two minutes .
B. Help and Tips
Select this option for additional
information .
C. Power Save
Select this option to conserve the
display's power or if you prefer
to turn off graphics . When power
save is ON, the display will turn
off within two minutes after any
user interaction .
23
(WPS) standard .
1
2
3
4
5
6
7
8
9
10