Belkin F5D8232-4 User Manual page 44

Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type to
Point-to-Point Tunneling Protocol (PPTP)
[European countries only]
Some ISPs require a connection using PPTP protocol, a type of
connection most common in European countries . This sets up a direct
connection to the ISP's system . Type in the information provided
by your ISP in the space provided . When you have finished, click
"Apply Changes"
Status indicator will read "connection OK" if your N1 Vision is set
up properly .
1. PPTP Account
Enter the PPTP account name that has been provided by your
ISP here .
2. PPTP Password
Type in your password and retype it into the "Retype Password"
box to confirm it .
3. Host Name
Enter the host name that has been provided by your ISP here .
4. Service IP Address
Enter the service IP address that has been provided by your ISP here .
5. My IP Address
Enter the IP address that has been provided by your ISP here .
(9)
. After you apply the changes, the Internet
40 40
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)