Belkin F5D8232-4 User Manual page 58

Using the Web-Based Advanced User Interface
1.
Wi-Fi Protected Setup (WPS): Enabled or Disabled .
2.
Personal Identification Number (PIN) Method: In this method,
a wireless client wishing to access your network must supply
a 4- or 8-digit PIN to the N1 Vision . After clicking "Enroll", you
must start the WPS handshaking procedure from the client within
two minutes .
3.
Router PIN: If an external registrar is available, you may enter in
the N1 Vision's PIN to the registrar . Click "Generate New PIN"
to change the PIN from the default value . Click "Restore Default
PIN" to reset the PIN value .
4.
Push Button Configuration (PBC) Method: PBC is an
alternate method to connect to a WPS network . Push the
"Start PBC" button and then initiate the PBC on the client
device . Alternatively, push the "Start PBC" soft button to
start this process .
5.
Manual Configuration Method: This section lists the default
security settings if not using WPS .
The N1 Vision features WPA2, which is the second generation of the
WPA based 802 .11i standard . It offers a higher level of wireless
™
security by combining advanced network authentication and stronger
Advanced Encryption Standard (AES) encryption methods .
54 54