Belkin F5D8232-4 User Manual page 107

Troubleshooting
3.
Under the "Wireless Networks" tab, click the "Configure" button
and you will see the following screen .
4.
For a home or small business user, select "WPA-PSK" under
"Network Administration" .
Note:
Select WPA (with radius server) if you are using this computer to
connect to a corporate network that supports an authentication server
such as a radius server . Please consult your network administrator for
further information .
5.
Select "TKIP" or "AES" under "Date Encryption" . This setting will
have to be identical to the N1 Vision that you set up .
6.
Type in your encryption key in the "Network key" box .
Important:
Enter your pre-shared key . This can be from eight to 63
characters and can be letters, numbers, or symbols . This same key
must be used on all of the clients that you set up .
7.
Click "OK" to apply settings .
What's the difference between 802.11b, 802.11g, 802.11a, and
draft 802.11n?
Currently there are four levels of wireless networking standards,
which transmit data at very different maximum speeds . Each is
based on the designation for certifying network standards . The
most common wireless networking standard, 802 .11b, transmits
information at 11Mbps; 802 .11a and 802 .11g work at 54Mbps; and
draft 802 .11n works at 108Mbps . See the chart on the next page for
more detailed information .
103
1
2
3
4
5
6
7
8
9
10