Restarting The N1 Vision - Belkin F5D8232-4 User Manual

Using the Web-Based Advanced User Interface

Restarting the N1 Vision

Sometimes it may be necessary to restart or reboot the N1 Vision if it
begins working improperly . Restarting or rebooting the N1 Vision will
NOT delete any of your configuration settings .
Restarting the N1 Vision to Restore Normal Operation
1.
Click the "Restart
Router" button .
2.
The following message
will appear . Click "OK" .
3.
The following message
will appear . Restarting
the N1 Vision can take
up to 80 seconds . It is
important not to turn
off the power to the N1
Vision during the restart .
4.
An 80-second countdown will appear on the screen . When the
countdown reaches zero, the N1 Vision will be restarted . The N1
Vision's home page should appear automatically . If not, type in
the N1 Vision's address (default = 192.168.2.1) into the navigation
bar of your browser .
70 70